The need to pull a small boat up a 45 degree slope prompted this project. it was the last project in a series of four that included a dock, walk way, deck and terrace steps up to the rear patio.. She couldn’t wait to jump off the boat into the water. but while it was easy to get her off of the boat, getting her back on to the boat was a bit of a problem. enter my clever dad. after doing some online research, he decided to make a floating ramp-like device that dallas could use to climb out of the water and on to the boat (or dock).. Shoredocker model # sd-1200 do-it-yourself boat ramp kits is the simple, cost effective way to dock your boat or jet ski. the basic kit is designed to accommodate watercraft with a loaded weight of up to 1200 lbs. and up to 16 ft. in length..
These kit’s have everything you need to build your own capacity boat ramp! capacity boat ramp, just add treated lumber (not included in kit). this basic kit is a simple and cost effective way to dock your watercraft.". Measure the length of your boat trailer, from the tip of its tongue to its tail lights and multiply by two. this is how long your ramp must be; few boat ramps are longer than twice the length of a boat trailer. measure the width of your trailer.. The two most important considerations when using a ramp to board a dog from the water are the angle of the ramp and the depth of the end of the ramp..
